After Each Use; Cleaning And Maintenance; Circuit Diagram - Tectake 405220 Bedienungsanleitung

3. Check whether there is any object that is easily damaged by steam on the back of the clothing.
4. It is suggested that the garment steamer should not be used around the metal fittings of the clothing.
The high-temperature steam will cause the metal accessories to fade.
5. when you press the steam button, you will feel the vibration and hear the subtle buzzing sound.
This is normal.
6. While ironing, the steam panels are pasted on the creases of the fabric to move up and down, so that
the creases can be ironed.
7. If the sound of the garment steamer becomes louder and there is no steam coming out, it means that
there is a shortage of water in the water tank. Please check the water level of the water tank and refill
water to the water tank.
8. If the steam button is released, the steam will be stopped.

After each use

1. When you stop using it, press the power switch or pull the power cord out of the outlet.
2. Remove the water tank and empty the remaining water from the water tank.
3. Place it on the flat desktop vertically and wait for the product to cool down.

Cleaning and maintenance

1. Remove steam brush on the head of the garment steamer at first and then use wet cloth to clean.
2. Please do not use rough or corrosion cleaners or solvents.
3. Do not immerse the garment steamer into water or other liquids.
4. Don't fall, throw, or try to bend it. Don't try to disassemble or decompose electrical appliance.
5. Empty the water tank after each use.
6. Avoid storing electrical appliances in damp places.
7. Do not approach the heat source or exposure the electrical apparatus to direct sunlight.
8. Always ensure that the steam outlets are clean and free from scaling and are not clogged.
9. It is suggested that the garment steamer should be stored vertically in flat places such as cabinet.
10. Do not treat discarded electrical appliances as unclassified municipal waste, you should hand over
them to an officially designated recycling center.

Circuit diagram

Pump
thermostat
Heating Element
Thermal Fuse
4