Contax RX Bedienungsanleitung Seite 12

12
How to Mount
The Real Time Winder attaches directly to the base of your
CONTAX RTS. When mounting, however, make sure the
Sel.ector Dial is set at "OFF".
[] Fold out the battery compartment. Pry up t he camera
setscrew handle and, after matc hing the ca mera setscrew
with the tripod socket on the camera base, turn the set-
screw securely to attach the Real Time Winder to the
camera base .
• Make sure the Rea l Time Winder is fixed f lush with the
camera base. If there is a gap, remove the un it and mount
it allover again.
~
After checki ng that the Real Time Winder is mounted
properly, close the battery compa rtment.