BUTURE Beta06 Schnellstartanleitung Seite 8

Connect the air hose firmly to product and tire respectively, and tighten it.
1
1
2 Set pressure. Short press the power button "
inflation mode " " and air pressure unit " " , then optionally adjust the
air pressure value with buttons " " " " .
3 Long press the inflation button "
when the air pressure reaches the preset value.
Tip: If used for a long time, it is recommended to stop every 10 minutes
to cool down.
· Support 5 inflation modes, up to 150 PSI
Inflatable Mode
Car Inflatable Mode
Motorcycle Inflation Mode
Bicycle Inflatable Mode
Basketball Inflation Mode
Customized Air Pressure Mode
· Checking your car's tire pressure
1. Short press the power button "
2. Connect the air hose connector to the tire nozzle and pay attention to
press to the end and press firmly.
3. The pressure shown on the display is the current tire pressure.
7.JUMP START YOUR CAR
" to start. It will stop automatically
Air Pressure Range
26-51 PSI, 1.8-3.5 BAR, 179-352 KPA
26-44 PSI, 1.8-3.0 BAR, 180-303 KPA
30-65 PSI, 2.1-4.5 BAR, 207-448 KPA
4-16 PSI, 0.3-1.1 BAR, 28-110 KPA
3-150 PSI, 0.2-10.3 BAR, 21-1034 KPA
" to turn on the machine.
+
-
EN 06
" to power on, select the
START
/STOP