BUTURE Beta06 Schnellstartanleitung Seite 10

Solid red
Solid red with
discontinuous beep
Solid red with long
beep
Other
9.TROUBLESHOOTING ABOUT JUMP STARTER
2
3
7
1. Low voltage protection ---Recharge the product
2. Over-heating protection ---Remove the clamps
to let it cool
3. Timeout protection ---Connection timed out.
Start engine within 60s or remove the clip within
30s after a successful start
1. Reverse polarity protection ---Reverse the clips
and ensure the correct connection (red to +, black
to -)
2. Sticking fault ---Contact
for replacement parts
Short-circuit protection ---Don't connect the clips
together or to the same metal
official@ibuture.com
Please contact
Low temperature charging protection
---Unplug the charger and wait for the protection
to be released
High temperature charging protection
---Unplug the charger and wait for the protection
to be released
High temperature discharge protection
---Unplug the electrical equipment and wait for
the protection to be released
Cylinder over temperature protection
---Do not touch the machine and trachea
immediately to prevent high temperature burns
and wait for the machine to stand for 10 ~ 15
minutes
EN 08
official@ibuture.com
with details