PURE Move T4 Bedienungsanleitung Seite 7

Safety
Before you use yourMove T4, read the following safety instructions.
1. Read allthe safety informationand instructions before using the product.When passing thisproduct to someone,
include alldocuments.
2.
If youdo not follow the ope rating instructions provided,it maycompromise the safety of your product and this may
invalidate the warranty.
3.
Do not expose the product to dripping or splashing. Do not place objects filled withliquids,suchas vases,onthe
product.
If liquid or water spills onto the product,switchit off immediately and contact your dealer.
If youare using a mains-powered adapter, do not touchthe product withwet hands.
4.
The internalbattery inthis product is not user replaceable. Do not expose the battery to excessive heat or naked
flames. Ensure adequate ventilation and airflow around the product,particuarly whencharging.Dispose of the
product inaccordance with localenvironmentalrules.
5.
Using the product inrooms or climates with highhumidity and temperatures maycause condensationto form inside
the product, whichcandamage the product. Use the product inmoderate climates only.
6.
Do not use yourproduct inextremely hot or cold temperature. Keep the device awayfrom heat sources, suchas
radiators or gas/electric fires.Do not expose yourproduct to naked flames, suchas lighted candles.
7. To charge your product,onlyconnect it to a supply source that meets the safety isolationrequirements of
EN60065 or EN60950-1 for anaccessible safety extra low voltage circuit.For this connection,use either the
supplied micro-USB cable or asuitably CEapproved power adapter withthe correct USBoutput rating.
8. Power the product using anexternal5 V DC 1.5 A power supply.The maximumoutput current is 1.5 A,prote cted by
aninternalcircuit.
9.
Before you charge your product,ensure that the available supplyvoltage corresponds withthe required
operationalvoltage of the product.
10.
Disconnect your product from the charging powe r supplyif youwillnot use your product for a long period of time
(for example, if youare going onholiday).
11. Always unplug yourproduct from the charging powe r supplybefore cleaning.When cleaning the product,do not
use any type of abrasive pad or abrasive cleaning solutions as these maydamage the product's surface.
12.
To reduce the risk of electric shock,do not remove any screws. The product does not containany user-serviceable
parts inside.Product repairs should only be carried out by authorised personnel.
2