FLINQ FQC8357 Handbuch Seite 4

Manuel
EN
Free standing instructions
Unpack your package and find the heater together with the free standing accessories
pack. You will find accessories for free standing: 2 plugs, 2 rings.
Mount the standers
1
Snap the stander into the groove of the bracket on the bottom, cover the 2pcs caps
onto the 2pcs screws(Size:M4*10)on the brackets on the bottom side of the heater.
Then screw the bolts in to the holes on the bracket.
Display and control panel
Operating Part
1. ON/OFF
2. Setting Program
3. Temp./Timer UP key, long press to turn
on the "Child lock"
4. Temp./Timer DOWN key, long press to
turn off the "Child lock"
Display Part
5. Heating indicator light
6. Timer
7. Child Lock key
8. Degree indicator light
9. Timer indicator light
10. WiFi indicator light
11. ECO indicator light
12. Display of Temperature / Timer
10 11
5 8
6 12
7 9
1 2 3 4
Instructions of the indicator light
ON/OFF : Press to turn on /turn off the heater;
Setting Key
Press Setting key to cycle the setting between temperature and timer, when the icon
is light on, the timer can be set; when
Long press to turn on/ turn off WIFI mode;
WIFI indicator light : there are 3 modes for this light:
Solid light on , means WIFI is connected , you can operate the heater by APP with your
smartphone;
A. Rapid blink : you can connect the heater to WIFI by smartphone, most of the device
will connect to the WIFI on this mode;
B. Slow blink : you can connect the heater to WIFI by smartphone, few device will
connect to the WIFI on this mode.
You can press the setting key to change the rapid blink and slow blink.
Heating indicator light : When it is light on, means the unit is in heating.
Smart ECO mode(Open window detection)
In the On mode, when the ambient temperature drops more than 5 degrees(or more)
within 10 minutes, the product starts ECO mode, it will automatically stop heating.You
need to press on the remote control to start the product heating again.
FlinQ Smart Indoor Hybrid Heater
icon is light on, the temperature can be set ;