Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Manuel
EN
13. To prevent overloading a circuit, do not plug the heater into a circuit that already
has other appliances working. Do not install the heater under the wall socket.
14. It is normal for the plug to feel warm to the touch; however, a loose fi t between the
AC outlet (receptacle) and plug may cause overheating and distortion of the plug.
Contact a qualifi ed electrician to replace loose or worn outlet.
15. The output of this heater may vary and its temperature may become intense
enough to burn exposed skin. Use of this heater is not recommended for persons
with reduced sensitivity to heat or an inability to react to avoid burns.
16. WARNING:In order to avoid overheating, do not cover the heater.
Specifi cations
Power
800W
Touch screen
Big Modular LED screen with touch control;
Cord Length
1,5 meter
220-240V~, 50/60Hz
Voltage
Indicator light
Yes
G.W/N.W(kgs)
11.15 / 8.2KG
Timer
24H
Control
Via remote, touch screen or FlinQ app
Wall mounting instructions
Unpack your package and fi nd the heater together with the wall mounting accessories
pack. You will fi nd accessories for wall-mount: 4 plugs, 4 screws.
Drill the 4 holes
1
Mark the positions of the four holes to
be drilled on the wall, and drill the holes
with the drill bit. Make sure the distance
between each holes is same as the holes
on the brackets at back of the heater.
Place heater on the wall
3
Lift the heater and aim the four holes on the brackets at back of the heater to the 4
screws on the wall, and slide the screw from Position A to Position B by moving the
heater slightly.
FlinQ Smart Indoor Hybrid Heater
Insert plugs / screws
2
Insert the plugs in to the drilled holes
and nsert the 4 screws in to the plugs.
Werbung
