5. To reverse the orientation of the boom from the left
earcup to the right, do not remove the boom's screw-on
clasp. Simply re-bend the cable end of the boom
downward in the opposite shape (see Figure B).
Always ensure the cable is pointing downward
to prevent cable breaks.
Getting the most from your ModMic Uni 2
1. The mic is sensitive to plosive blast/wind
from your mouth, especially "P" sounds
(see Figure C).
2. To lessen unwanted cable torque on the clasp,
fold the cable end of the boom so that it is
close to the clasp (see Figure D).
3. Ensure the mic symbol on the boom is pointed
towards your mouth (see Figure E for detail).
Do you need a little more help?
Here are some common troubleshooting steps that may help you out.
1. Ensure the mute switch is in the unmuted position.
2. Make sure you have the ModMic selected as your default listening device in your recording devices options.
3. Try multiple ports on your computer/device if you're having audio quality issues.
4. Test the device on another port, or machine/device if possible.
5. If you need additional help contact us at customerservice@antlionaudio.com for service.
B
C
D
L
E
R
Microphone Icon