Change Batteries - Elma Instruments 107 Bedienungsanleitung

ELMA VOLTTEST 107
Operating Instructions GB
Thank you for purchasing the Elma 107.
• Contact-free voltage tester from 110 to 1000V AC
• Torch lamp with high efficient LED
• Acoustic warning tone
1a.) Contact-free Voltage Test
The Elma 107 is able to seek live wires out with the circuit
integrated in
the point. When recognizing an alternating voltage of 110 V
AC, the white
cap flashes up red (see picture point 1a) and a warning tone
rings out.
A current flow is not necessary!
1b.) Torch lamp
Switch on the integrated flashlight by pressing the knob (see
picture
point 1b). With the high efficient LED an illuminated period of
up
to 60 hours (per battery set) is attainable! The life span of the
LED is
more than 100,000 hours.

2.) Change Batteries

Take a screwdriver and lever out the battery case at the
indentation
(see picture point 2).
Pay attention when inserting the new batteries to the polarity!
Do not dispose the empty batteries with the domestic refuse.
In your proximity is a suitable collecting point!
Warranty
As an ISO 9001 certified enterprise we guarantee you a constant
high quality of our products. This makes us possible
to grant you a guarantee of 3 years on our Testboy-products.
Elma 107 Page 6