Summer Infant PANORAMA Kurzanleitung

Summer Infant, Inc. Summer Infant Europe, LTD.
1275 Park East Drive First Floor, North Wing
Woonsocket, RI 02895 USA Focus 31, Cleveland Road
1-800-268-6237 Hemel Hempstead, HP2 7BW UK
© 2014 Summer Infant, Inc. +44 (0) 1442 505000
customerserviceuk@summerinfant.com
PANORAMA
ADDING EXTRA VIDEO CAMERA
WARNING!
STRANGULATION HAZARD! - Children have STRANGLED in cords. Keep this cord out of reach of
children (more than 1 m away from the cot). Use enclosed Security Clips to help secure cord away
from baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided.
Adding a Camera:
Step 1: Move the handheld unit to the same area as the camera.
Step 2: Switch on the camera AND handheld.
Step 3: Press and hold the
blue light blinks repeatedly.
Step 4: Press the button on the handheld to call up the menu.
Step 5: Using the button, highlight "ADD CAM".
Step 6: Choose which of the 4 cameras you would like to pair by navigating the
"Left "or "Right " button. (The next available camera will automatically be
highlighted)
Step 7: Press the button to begin pairing. A signal bar will appear once pairing
begins.
Step 8: Once successfully paired, the blue light will stop blinking and video will appear
on the monitor screen.
If this is unsuccessful, you should repeat steps above making sure the camera and
monitor are close enough to each other for pairing.
Deleting a Camera:
Step 1: Switch on the Handheld. Press the
Step 2: Using the button, highlight "DELETE CAM".
Step 3: Using the "Left
"or "Right
button to delete that camera.
Scanning Cameras:
Step 1: Switch on the Handheld. Press the
Step 2: Using the
button, highlight "SCAN" and press the
Step 3: Scanning cameras will begin, cycling though each camera for 8 second intervals. Pressing the
button will exit scan mode.
Note: SCAN function is only available if more than one camera is paired.
View Cameras:
Step 1: Switch on the Handheld. Press the
Step 2: Using the
button, highlight "VIEW CAM".
Step 3: Use the "Left "or "Right
button to begin viewing highlighted camera.
02/17
INSTRUCTION MANUAL
button on the camera for 10 seconds until the
to call up the menu.
" button to highlight the camera you would like to delete. Press the
to call up the menu.
button to activate.
button to call up the menu.
" button to highlight the camera you would like to view. Press the
29696
10 sec.