TIGMON lauben MULTIFUNCTION RICE COOKER 1500BW Benutzeranleitung Seite 20

Place the silicone seal of the inner oval opening inside the opening and spread it evenly.
Place the inner lid so that the oval opening in the inner lid is aligned with the steam outlet on the inside of the lid. Press gently
until the inner lid fits properly.
Outer Surface
Wipe the outer surface and the inside of the rice cooker with a soft sponge slightly dampened in warm water. Wipe dry with
a clean cloth.
STORAGE
Before storing, clean the rice cooker according to the instructions above.
Store the rice cooker in its original box or other packaging in a dry and shaded place out of reach of children and pets.
TROUBLESHOOTING
In the table below, you will find possible problems and their solutions that you may encounter during use. It will help you solve
the problem without having to call an authorised service centre.
If the problem is not listed in the table or persists, stop using the rice cooker and contact an authorised service centre. Do not
attempt to repair the rice cooker yourself. There is a risk of electrical injury.
Problem
After connecting to a power source, the
display does not light up and the heating
element does not heat up.
After connecting to a power source, the
display does not light up but the heating
DE
element heats up.
After connecting to a power source,
EN
the display lights up but the heating
element does not heat up.
Rice is not cooked sufficiently, or the
CZ
cooking process takes a very long time.
SK
PL
HU
SL
Rice is burnt, or the rice cooker does not
automatically switch to the Keep Warm
mode.
HR
20 |
Cause
The power cord is not properly inserted
into the socket, or the plug end of the
power cord is not properly inserted into
the receptacle.
The mains socket you have plugged the
rice cooker into is not powered or has
a tripped circuit breaker.
The mains socket into which you have
plugged the rice cooker is damaged or
the electrical circuit is damaged.
Fault in the internal circuit.
Fault in the internal circuit.
Fault in the main thermostat.
Fault in the internal circuit.
Fault on the motherboard.
Rice was not evenly distributed in the
pot.
The heating element or the inner pot is
deformed.
The inner pot is slanted and one side
hangs in the air.
There is a foreign object between the
outer bottom of the pot and the heating
element.
Fault in the main thermostat.
Fault in the internal circuit.
Fault in the main thermostat.
Fault in the internal circuit.
Solution
Check the connection of the power cord
or the plug.
Plug the power cord into a different
socket or reset the circuit breaker.
Contact a qualified electrician.
Contact an authorised service centre.
Contact an authorised service centre.
Contact an authorised service centre.
Stir the rice before closing the lid and
make sure the surface is level.
Contact an authorised service centre.
Rotate the inner pot from side to side to
return it to its original position.
Remove the foreign object.
Contact an authorised service centre.
Contact an authorised service centre.