ARGENTO Active Bike Bedienungsanleitung Seite 25

• Prior to using the item for the first time, charge to 100%.
• Check tyre pressure (see side of tyre for recommended value). If the item does not reach at least 60% of the declared kms, or
the maximum speed within the first 3 months of use, it is likely that the wheels have deflated once more. In this case, restore
pressure as indicated.
• Check and adjust the brakes.
• Insert the key into the ignition switch to activate the display (Active Bike).
• For all models except the "Active Bike", turn on the display.
• Place the item onto a flat surface.
• Hold the handlebars firmly using both hands. Step onto the footrest with one foot and use the other to give yourself a gentle
push and accelerate.
CAUTION
Zero Start Function: tthe throttle is activated once the forward speed exceeds 3 km/h.
For safety reasons, the item is initially set up to avoid standing starts. • When riding the item, tilt body in the riding direction
during a turn and slowly turn the handlebars.
• To stop the item, release the throttle, pull the brake lever(s).
• To get off, first stop the item completely. Getting off the moving item can cause injury.
• Prior to each use, check brakes and any wear, check tyre pressure (see side of tyre for recommended value), wheel wear,
throttle and charge status of battery.
Adjustments:
Brake levers and handlebar (Active Bike)
6. Quick guide
24
The angle of the handlebar can be adjusted
by loosening the lever on the handlebar (A)
and turning the handlebar up/down.
The height of the handlebar can be
adjusted by loosening the lever on the stem
(B), moving the handlebar up/down.
Once the position has been adjusted, lock
the handlebar/stem lever once more.