TecTake 405083 Bedienungsanleitung Seite 5

EN
Dear customer!
Should you have any remarks or questions concerning the product, please do not hesitate to
contact us: www.tectake.de
Before you use the baby swing for the first time, please read this manual carefully.
A wrong use of the product may pose a threat to your child.
Note! Only an adult is allowed to assemble the product.
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
Producer:
tectake GmbH.
Tauberweg 41,97999 lgersheim, Gemmany
WARNING
The product is intended for new-born babies and older children.
Never leave the child unattended.
Do not use this product once your child can sit up unaided or weights more than 9 kg.
Never use this product on an elevated surface (e.g. a table).
Always use the restraint system.
To avoid injury ensure that children are kept away when unfolding and folding this product.
Do not let children play with this product.
Do not move or lift this product with the baby inside it.
Never let the child sleep in this product. This product does not replace a cot or a crib. Should
the child fall asleep, then it should be placed in a suitable cot or crib.
Do not use the product if any element is missing or damaged.
Do not use accessories or spare parts other than recommended by the manufacturer
Keep this manual for future reference.
WARNING! If the cable is not used for power supply, unplug it from the USB port of the baby
swing and keep away from children.
Warnings related to batteries and feeder cable
Keep batteries out of reach of children.
Insert batteries in the compartment in accordance with marking.
Do not throw batteries into fire as they may explode.
If you do not use the product for a long time, please remove a battery from the compartment.
Always remove a worn-out battery, otherwise it may leak or explode and damage the product.
Do not charge single-use batteries.
Do not mix batteries - old with new ones, or alkaline with standard or multiple charge batteries.
Dispose of batteries in accordance with regulations, throw them into special containers.
Check the feeder cable for potential damage to the cable, plug, contacts and other elements.
If you detect any irregularities, do not use the feeder cable anymore.
When using the product, use the feeder cable of suitable parameters and recommended by
the manufacturer (supplied).
To make sure the product works, you need 4 LR14 batteries (not supplied)or feeder
cable (not supplied).The feeder cable parameters required: input:100-240V~50/60Hz0.3A,
output:5V 1000mA.
5