During the charging process, the display shows the charging process. The progressive battery icon
shows the charge level.
» Use of the photo light with mains electricity
You can operate the photo light with a power pack 5V 3A.
» Using the USB-A outputw
You can use the photo light as a power bank, for example to charge smartphones. In order to be able
to use the photo light as a power bank, it must be switched on.
LEDs
Brightness
Color index
Dimming range
Color temperature
RGB color gamut
Perfomance
Battery pack
Mains operation
Screen
Tripod thread
Ambient temperature
Storage temperature
Humidity
Height Weight
Warnings
• The photo light is not dust and/or waterproof.
• Protect the photo light from strong shock, do not drop it.
•
• Do not look directly into the light from the LEDs, as this can damage the retina and cause visual
impairment.
•
• The photo light and its accessories are not children's toys.
• Be sure to turn off the photo light after use. Disconnect from the power source.
• After use, allow the photo light to cool down before packing or dismantling.
• Do not disassemble and/or modify the photo light.
• Pay attention to the correct voltage values.
RGB 5050 80 pieces 0.2W, 2500K 2835 40 pieces 0.5W, 8500K
2835 40 pieces 0.5W
max. 1450lx
CRI 97+
0 – 100%
2500K - 8500K
0 - 360°
LED: 12W, Out: USB-A 5V 2.4A 12W max., In: 5V/3A 15W max.
Li-Polymer 3.8V 3800mAh 14.44Wh
5V 3A max.
OLED display
2 x 1/4"
0 – 45°C
-20 – 60°C
20-80%
158×80×12.4mm, 214g
- 7 -