SOLIS 869 Bedienungsanleitung Seite 51

▲
STARTING UP
• Place the motor base on a dry and even work top, out of the reach of children,
near a wall power socket.
• If the appliance has been used already and is still warm, let it cool down.
• Check if the heater plate and the bottom of the jug are clean and dry.
■
MAKING FROTHED MILK, HOT OR COLD
fig. 1
fig. 4
• Lift the lid off the glass jug (fig. 1).
• Place the toothed foam blender on the pin in the glass jug (fig.2).
• Fill the glass jug with cold milk. Look for the MIN and MAX markings. If you pour
in too much milk – more than 350 ml – the milk, which increases in volume when
heated, might spill out of the jug (fig. 3).
• Place the lid back on the glass jug (fig. 4).
• Place the glass jug on the heater plate of the appliance base, using the handle.
Plug the power plug into a suitable wall outlet (fig. 5).
fig. 2
fig. 5
fig. 3
fig. 6
51