MSI FORCE PRO WIRELESS Kurzanleitung Seite 5

Recharge the Controller (via USB-C Cable)
• Indicator LED off: Power off.
• Indicator LED flashing RED: Battery is low within 1%-29%.
• Indicator LED flashing YELLOW: Battery is charging within 30%-69%.
• Indicator LED flashing GREEN: Battery is charging within 70%-99%.
• Indicator LED solid GREEN: Battery is fully charged.
Feature Compatibility
Platform
1
Feature
Impulse Trigger
Vibration Feedback
Audio
MSI Mystic Light
MSI Center
1� PC & Xbox profile settings must be set up in the MSI Center then saved in the onboard
memory.
2� Xbox includes Xbox X|S, and all Xbox One consoles in wired mode.
3� Bluetooth is available on Windows 10/ 11 and Android 8 and Later.
4� The controller requires a driver to connect via Bluetooth on a PC. Please download and
extract the driver installation file from
WIRELESS/support�
Customization & Firmware Updates
Download the latest version of MSI Center to customize controller settings such as
reconfiguring buttons, vibration, thumbsticks, triggers, lighting and power saving or to receive
firmware updates.
MSI Center can be downloaded from:
Power off / Power Saving / Reset
• To power off the controller, press the Xbox Button for more than 3 seconds until the Status
LED turns off.
• If there is no activity for 2 minutes, the Status LED will flash 3 times as a reminder and enter
idle mode.
• If there is no activity for 10 minutes, or if any of the thumbsticks are removed, the controller
will power off�
• Press and hold the Xbox Button for 12 seconds to perform a hardware reset and reboot the
controller.
PC
USB-C Bluetooth
V
V V
V
V V
V
https://www.msi.com/Gaming-Gear/FORCE-PRO-
https://www.msi.com/Landing/MSI-Center
2.4 GHz
V
V
5
Xbox Android
2
USB-C Bluetooth
V
V V
V
V V
3