Hisense RB3B250SAWC Bedienungsanleitung Seite 50

Electronic controls
2 .Appliance with out
switch on demo mode, press and hold
"Power" And "Alarm" buttons at same
time for three seconds and the buzzer
beeps 3 times. the display panel will
show " OF ， " the Demo mode has been
turned on.
If there is no button operation for 10
seconds, it will keep display "
otherwise it will display the set
temperature.
To switch off demo mode, press and
hold "Power" And "Alarm" buttons at
same time for three seconds and the
buzzer beeps 3 times.
8. Convert
Press and hold "Convert"
for 5 seconds to turn the Convert
function on or off.
The entire freezer compartment can be
converted into a Smart Zone
compartment. The temperature in this
compartment is at or slightly below 0°C.
Therefore, do not store food that is
sensitive to low temperature in this
compartment, as such food could
freeze. Before switching to Smart Zone
function, empty the freezer
compartment to prevent the frozen
food from defrosting and perishing.
WiFi function to
OF ",
button
• Activating the Convert function:
press the "Convert" button for 5
seconds. A beep will be sounded, and
the " " indicator will light up.
• When this function is activated, the
temperature in the freezer
compartment will be set to 0°C, while
the refrigerator compartment
temperature will be set to 4°C. "
flash on the display until the
temperature in the freezer
compartment reaches the appropriate
temperature. When this temperature is
reached, the " " indicator will be
constantly lit.
• Setting the temperature in the Smart
Zone compartment use the right
"Temp" button to set the temperature
between -5°C and +3°C.
• Setting the temperature in the Fridge
compartment use the left "Temp"
:
button to set the temperature between
+2°C and +8°C.
• When the Convert function is
activated, the Super Cool, Super Freeze,
and Eco functions will be deactivated,
while other functions can be activated.
• When the Convert function is
activated, the Freezer High temperature
alarm function will be disabled.
• Deactivating the Convert function:
press the "Convert" button for 5
seconds again. A beep will be sounded,
and the Convert indicator will no longer
be lit.
" will
:
16