Setting The Alarm Properties; Setting The Display Brightness; Setting The Snooze Duration; Switching The Button Tone On/Off - Beurer WL 80 Gebrauchsanweisung

7.2 Setting the alarm properties

You can choose to wake up with one of the 8 wake-up
melodies, an alarm tone, the radio or your own music
via a USB stick.
For the alarm times that have been set (see section 8.1),
you can configure the following alarm properties: alarm
tone, volume, sunrise, duration of sunrise, brightness of
sunrise.
To configure the alarm properties, proceed as follows:
• When the device is switched on, press the Menu/Set
button. "TI M E " flashes in the display.
• Use the / buttons to select the desired alarm
storage location (A LA R M 1 , A L A R M 2 or A L A R M 3 )
for which you wish to configure the functions. Confirm
using the Menu/Set button.
• The currently set alarm tone (e.g. B U Z Z) flashes. Use
the / buttons to select the desired alarm tone.
Confirm using the Menu/Set button.
Note
B UZ Z = acoustic signal
SO U N D 1-8 = 8 different wake-up melodies
RA D IO = radio
US B = via connected USB stick
• The alarm volume (VOL) flashes. Use the
to set the desired volume (1 to 1 0). Confirm using the
Menu/Set button.
• The sunrise function flashes (SUNRISE). Use the /
buttons to switch the sunrise function on (O N ) or off
(OFF). Confirm using the Menu/Set button.
Note
You can also choose to be woken up by a sunrise
function in addition to the alarm tone. The sunrise
function is a simulated sunrise. In the process, the LED
light slowly turns brighter prior to the actual alarm time
that is set.
• If the sunrise function is switched on, the duration of
the sunrise flashes (1 0 M I N ). Use the
to select the duration of the sunrise prior to the alarm
time (1, 2, 5, 10, 20 or 30 minutes). Confirm using the
Menu/Set button.
• The brightness of the sunrise flashes (2 0 L I ) in the
display. Use the /
brightness of the sunrise at the alarm time (5, 10, 15
or 20). Confirm using the Menu/Set button. If you are
woken up by light relatively quickly, then we recommend
reducing the brightness.
/ buttons
/
buttons to select the desired

7.3 Setting the display brightness

• When the device is switched on, press the Menu/Set
button. "T I ME" flashes in the display.
• Use the
using the Menu/Set button.
• The current display brightness flashes (3 D I SP LA Y).
Use the
(OFF, 1, 2, or 3). Confirm using the Menu/Set button.
Note
Once the setting is made, it takes approx. 10 seconds
for the currently configured display brightness to
appear. This is because the display is automatically
illuminated at the highest setting for 10 seconds
each time a button is pressed (including the snooze
function).

7.4 Setting the snooze duration

• When the device is switched on, press the Menu/Set
button. "T I ME" flashes in the display.
• Use the / buttons to select SNOOZE. Confirm using
the Menu/Set button.
• The snooze duration flashes (5 MIN SNOOZE). Use the
/ buttons to select the desired snooze duration (1, 2,
5, 10, 20 or 30 minutes). Confirm using the Menu/Set
button.

7.5 Switching the button tone on/off

• When the device is switched on, press the Menu/Set
button. "T I ME" flashes in the display.
• Use the
using the Menu/Set button.
• Use the
(O N) or off (O F F). Confirm using the Menu/Set button.

8. Device functions

8.1 Setting the alarm

The device features three alarm memory spaces that can
be configured individually.
buttons

8.1.1 Switching the alarm on (ON)

1. When the device is switched on, keep pressing the
ALARM button until the desired alarm memory space
appears in the display (A 1, A 2 or A 3).
2. Press the / buttons until ON appears in the display.
3. Press the Menu/Set button. The hour display of the
alarm flashes in the display. Use the
set the hour and confirm using the Menu/Set button.
12
buttons to select D I S P L A Y . Confirm
/
/ buttons to select the desired brightness
buttons to select FE ED B A C K. Confirm
/
/ buttons to switch the button tone on
/ buttons to