WebApp
SMART WebApp einrichten
Verbinden Sie den SMARTstreamer über den LAN-Eingang mit Ihrem
lokalen Netzwerk. Der SMARTstreamer ist im Auslieferungszustand
auf DHCP vorkonfiguriert.
Geben Sie http:/ /smartstreamer.local in die Adressleiste eines beliebi-
gen Browsers ein, egal ob PC, Tablet, Smartphone, o.ä. oder scannen
Sie den QR-Code auf dem Produktetikett auf der Unterseite des
SMARTstreamers.
Der SMARTstreamer wird angezeigt, sowie dessen MAC Adresse.
Klicken Sie auf SMARTstreamer und Sie kommen auf die LIVE Ansicht.
Set SMART WebApp
Connect the SMARTstreamer to your local network via the LAN input.
The SMARTstreamer is preconfigured for DHCP.
Enter http:/ /smartstreamer.local in the address bar of any browser,
regardless of whether it is a PC, tablet, smartphone, etc. or scan the
QR code on the product label on the back of the SMARTstreamer.
The SMARTstreamer and its MAC address are displayed. Click on
SMARTstreamer and you will get to the LIVE view.
8
LIVE ANSICHT
1 Mute Icon: Der SMARTstreamer wird stumm geschaltet. Der Be-
fehl wird so lange ausgeführt, bis Sie erneut klicken oder das Gerät
neu gestartet wird.
2. Mastervolume: zeigt die aktuelle Lautstärke in % an
3. Volumenregler: Damit wird die Lautstärke des ausgehenden
Audiosignals geregelt
4. Source: Die Standardeinstellung des SMARTplayers ist Analog
IN und gibt jene Musikquelle wieder, welche mittels mitgeliefertem
Audiokabel an das Gerät angeschlossen wird (Cinch).
5. Soundlevel: zeigt das Musiksignal in dB FS
LIVE VIEW
1. Mute Icon: The SMARTstreamer is muted. The command is execu-
ted until you click again or the device is restarted.
2. Mastervolume: displays current volume setting in %.
3. Volume control: controls the volume of the outgoing audio signal
4. Source: The standard setting of the SMARTstreamer is Analog IN
and plays the music source that is connected to the device using the
audio cable supplied (cinch).
5. Soundlevel: displays music signal in dB FS
1
2
3
4
5
9