i-box MiniGlow Bedienungsanleitung Seite 7

Before getting started
Before setup or making connections please unwind
the wire antenna fully.
Powering your Mini Glow alarm clock
The Mini Glow is powered by the AC/DC power
adaptor supplied. Plug the adaptor into a mains
socket Fig 1.and then connect to the DC power
socket (12)on the backof the Mini Glow Fig 2.
Battery backup
A CR-2025batteryisfitted in the batterycompartment(15)to providebackuppower
If the mainssupplyisdisconnected or interruptedthe backupbatterywill provide
powerto saveyour time and alarmsettings.Makesureyouremovethe plastictabto
activatethe battery.
PleaseNote: Thedisplay,radioand charging functionswill not operatewhenthe Mini
Glowis poweredsolelyby the backupbattery.
Clock Setting: In Standby Mode
To set the clock, ensure the AC power supply is connected.
2.
nn&nn
i -box
www iboxstyle.com
Fig 2.
Replacing the battery
8
O
Fig 1.
use sv
8
O
Choose between
12/24H display
Set hours
Set minutes
Mini Glow 07