APLIC 302968 Bedienungsanleitung Seite 10

4. Installation
Mount the front light on the handlebars and the rear light at the rear part of the
bicycle frame. For mounting on the front light, open the clamp and screw it. Place
the mounting clamp to the desired position and around the rod and screw it.
4.1 Front light
Because of the quick-release lock the front light is very easy to remove and re-in-
stall from the holder.
Press the lever (1) down and remove the light (2) as shown in the figure below.
2
2
1
1
10
English