Qufora IrriSedo MiniGo Gebrauchsanweisung Seite 2

EN
English
Explaining the system
Explaining the Qufora IrriSedo MiniGo components
Soft pump
A soft pump (180 ml) with a
flip lid that connects to the
cone.
The pump can be used 30
times (equal to 1 month
usage time*)
*when used for irrigation every day
The lid has a one-way valve, so the pump can be squeezed more than once, without air
or water being sucked back into the pump during use. For this reason, the pump will
stay compressed until the lid is opened.
Filling Qufora IrriSedo MiniGo with water
1. Open the lid and fill the pump up to the inner rim with luke warm tap water (36-
38° C) by holding it under the tap with the lid open.
2. Once the pump is filled to the inner rim hold onto the top part of the pump and
press down on the lid until you hear the click sound.
3. Open the cone pouch at the perforated line. Whilst the cone is still in the pouch
press the cone firmly to the small round opening on the lid to assemble your
system.
4. To activate the hydrophilic coating on the cone, wet the cone with water up to its
base for a few seconds. Gently squeeze the pump until water comes out of the
cone tip to remove the air. It is now ready to use.
1
Cone
A rectal cone with a
hydrophilic coating that is
activated with water.
The cone is single-use
2
Assembled
3 4
2