XD COLLECTION XD P322.53 Serie Bedienungsanleitung Seite 4

TO CHARGE THE POWER BANK
Connect the built-in cable to a wall adapter, or connect the supplied cable to the power bank
and the other end to a wall adapter. The charging will commence, and the indicator light will
turn blue.
• It is recommended to use an adapter that supports 5.0V=2.4A.
• After you have charged your device, recharge the power bank before using again.
• When fully charged, disconnect the power bank.
TO CHARGE YOUR MOBILE DEVICE
• Plug the cable into the Type-C port on the power bank, the other end goes into your
device. To charge your mobile device via an integrated cable, plug the integrated cable
into your mobile device.
• After you have charged your device and when the power bank has low power, please
recharge the power bank before using again.
IMPORANT: ONLY USE INCLUDED ACCESSORIES OR CERTIFIED AND TESTED ACCESSORIES
TO CHARGE THE POWERBANK. USING THIRD PARTY ACCESSORIES CAN INFLUENCE THE
ITEM SAFETY.
This power bank is a charging system for mobile phones and other small portable electronic
devices requiring a 5.0V=2.4A (maximum) current draw.
TO CHANGE THE BATTERY
Please ensure that you use the correct battery, as indicated in the specifications, when
replacing it.
1. Open the battery chamber:
1. Please use a tool and insert it into the lock.
4