EN
ENGLISH
1. KEYS AND SPECIAL FEATURES (SEE ILLUSTRATION ON PAGE 3)
1_SOS KEY: Press and hold to select an emergency number stored by you. This function can only be used with an optionally available LWP app.
2_POWER INDICATOR, PLEASE SEE THE DETAILED DEFINITION IN 8.5.
3_FRONT CAMERA
4_MIC/BAROMETRIC SENSOR
5_FUNCTION/CUSTOMIZED KEYS : F1/F2/F3, programmable keys used by different apps.
6_BACK KEY/HOME KEY/RECENT APPLICATION.
7_VOLUME KEY: Volume up/Volume down.
8_POWER KEY: Press and hold to power the device ON/OFF. Press briefly to power. ON/OFF the standby mode.
9_LOUDSPEAKER
10_4 POGOS PINS CONNECT THE DOCKING STATION FOR TABLET CHARGING.
11_SIM CARD/MICRO SD SLOT: Supports Nano SIM card or microSD card.
12_3.5MM AUDIO JACK
13_TYPE A: Connects the Type-A OTG device; charging is not supported.
14_TYPE C: To charge and connect the device with the included USB cable, and also connect the Type C OTG device.
15_BATTERY STATUS INDICATOR LED1:
Indicates the level of battery #1; please see the details in 8.5.
16_REAR CAMERA
17_BATTERY STATUS INDICATOR LED2:
Indicates the level of battery #2; please see the details in 8.5.
18_FLASH: Optional when taking pictures/videos or works as a flashlight.
19_BATTERY 1: removable battery.
20_BATTERY 2: removable battery.
21_BATTERY COVER LOCK: Use to unlock/lock the battery cover.
22_6 SCREW HOLES: Use to fasten the VESA standard mounting bracket or band strap.
2. INTRODUCTION
This document contains information and safety regulations that must be observed for the safe operation of device RG935 under the described onditions. Non-
observance of information and instructions can have serious consequences and may violate regulations. Please read the manual and these safety instructions before
using the device. In the case of any doubt, the English version takes precedent.
The current EU declaration of conformity, certificates, safety instructions and manuals can be found at www.RugGear.com or can be requested from Power Idea
Technology (Shenzhen) Co., Ltd.
3. RESERVED
The content of this document is presented as it currently exists. Power Idea Technology (Shenzhen) Co., Ltd. does not provide any explicit or tacit guarantee for the
accuracy or completeness of the content of this document, including, but not restricted to, the tacit guarantee of market suitability or fitness for a specific purpose
unless applicable laws or court decisions make liability mandatory.
Power Idea Technology (Shenzhen) Co., Ltd. reserves the right to make changes to this document or to withdraw it any time without prior notice. Changes, errors
and misprints may not be used as a basis for any claim for damages. All rights reserved.
Power Idea Technology (Shenzhen) Co., Ltd. cannot be held responsible for any data or other loss and direct or indirect damages caused by any improper use of
5