Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. The other end of the hose is
connected with the water outlet pipe
and the water inlet pipe, and the
water outlet pipe and the water inlet
pipe are fixed in the fish tank.
7. Ensure that the flow rate is
adjusted to the maximum.
6. Add water to the fish tank until
the distance between the water
surface and the edge of the fish
tank is less than 12cm,and the
outer barrel of the fish tank is
40cmbelow the water surface.
8. Pull the inflating handle up and
down for2~4 times to suck water
into the barrel.
9.After it is connected to the power
supply, check whether there is
water leakage around the filter
barrel, and check again 30-60
minutes later after it starts properly.
If there is no problem.it can be
used normally.
- 6 -
Werbung
