VEVOR SF-650F-UV8W Bedienungsanleitung Seite 10

3.Use a Phillips screwdriver to
unscrew the screw at the edge of
the water drum cover and take out
the water drum cover.
5. Use a Phillips screwdriver to
unscrew the screws and remove the
lamp cover for cleaning.
If you do not need to replace the UV lamp, please skip step 7 to step 9.
4. Remove the rotor and clean or
replace the new rotor as required.
The rotor holes can be cleaned with
brushes.
6.After removing the germicidal
lamp cover, clean the dirt on the
quartz tube with wet towel or clean
water. Do not remove the quartz
tube during cleaning to prevent
short circuit
flowing into the lamp cap line.
- 8 -
caused by water