Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FIRST BOOTUP
1. Select the language and press the confirm button
2. Connect to the internet:
• If the Ethernet cable is connected to the TV, the setup
wizard will automatically configure the connection.
• If you have a wireless connection, the Wi-Fi networks will
be displayed on the screen. Select your network and input
password (if required).
• Select which services do you agree to (only Privacy policy
is required to proceed).
3. Select the main source of signal. Make sure that all of the
cables are connected properly.
4. After selecting the TV option, the channel scanning
screen will appear. Press the Start scanning button.
5. Select the antenna. Press the right button.
6. Select if you want the analogue (ATV), digital (DTV) or
both. Select the LCN option if you want to sort the
channels with their logical name. Press the right button.
7. Scanned channels will be saved. If there are no channels
found, check the antenna connection. Press the Finish
button.
CONNECTING TO THE INTERNET
Wired
1. Connect the RJ-45 cable to your router or other source
of the internet.
2. Connect the cable to the Ethernet socket on the TV.
3. The TV should automatically configure settings and
connect to the internet. If there is a problem with
connection, check the Network settings on the TV and/or
check if your router is configured properly.
Wireless
EN
Note: wireless connection is available on selected models.
Check the box that TV came in to make sure that your TV is
equipped with the Wi-Fi.
1. Press the Home button and go to Settings menu.
2. Go to the
Network section
configuration.
18
Owner's manual
and
select
Network
Owner's manual
3. Change the Connection type to Wireless.
4. Press the Refresh button and wait for your Wi-Fi network
to appear.
5. Select your network and input password.
This symbol on the battery(ies) or on the packaging indicates that the battery(ies)
provided with this product shall not be treated as household waste. Instead,
please separate battery(ies) from other types of waste and recycle it(them)
through your local recycling system to protect environment and health. The chemical
symbol for lead (Pb) is added under this symbol if the battery(ies) contains more than
0.004 % lead. For more detailed information about recycling of this battery(ies), please
contact your local authority or the shop where you purchased the product or
battery(ies).
The terms HDMI, HDMI High-Definition Multimedia
®
Interface, HDMI Trade dress and the HDMI Logos are
trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
Dolby, Dolby Vision, Dolby Audio, and the
double-D symbol are registered trademarks
of Dolby Laboratories Licensing Corporation.
Manufactured under license from Dolby
Laboratories.
works.
Laboratories. All rights reserved.
EN
Confidential
unpublished
Copyright
©
2012–2024
Dolby
19
Werbung
