Technical Data; General Warnings - Rupes Rp84 Original-Bedienungs- Und Wartungsanleitung

TECHNICAL DATA

TYPE
PROTECTION CLASS
OPERATING VOLTAGE
ABSORBED CURRENT
ABSORBED POWER
ROTATIONN RPM
DIAMETER OF COLLET mm
WEIGHT Kg
WARNING! Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious
injury. Save all warnings and instructions for future reference.
The safety and accident prevention instructions are reported in the
"GENERAL SAFETY INSTRUCTIONS" booklet which is an integral part
of these documents. This operating instructions manual indicates the

GENERAL WARNINGS

additional information required for the specific use of the tool.
SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
SPECIFIC USE
The safety and accident prevention instructions are reported in the "SA-
• This electrical tool is designed to operate as a edge trimmer. Read all safe-
FETY INSTRUCTION" booklet which forms an integral part of these docu-
ty warnings, instructions, illustrations and specifications supplied with
ments; the operating instructions indicate the additional information requi-
this tool. Failure to respect all instructions indicated below can cause an
red specifically for use of the tool.
electric shock, fire and/or a serious accident. Grinding, polishing, me-
Any operations carried out on the tool must be effected with the power
tal brushing or cutting operations are not recommended with this tool.
supply disconnected.
Failure to follow all the instructions provided below may result in serious
Before starting the tool, ensure that it is held tightly and not in contact with
injuries.
the work surface.
• Do not use accessories that are not specifically designed for the intended
The cutters or must be correctly mounted and tightened.
Make sure that the sparks caused during work do not create danger by
use of the tool or that have not been recommended by the manufacturer.
hitting people or inflammable substances.
The fact that an accessory can be fixed to the tool does not imply that it
During machine use, dust, chips and shavings may form or touch rotating
can be used safely.
machine parts: due to potential risks, we recommend the constant use of
• The rated speed of the routers must be at least equivalent to the maxi-
P .S.D. (personal safety devices such as gloves, headphones, goggles, fa-
mum speed of the tool. If operated at a greater speed than the rated one,
ce masks, etc.) according to laws in force to prevent or reduce accident
accessories may break and cause the ejection of chips.
probability.
• During machine use, dust, chips and shavings may form or touch rotating
Extended machine use may cause hearing damage: wear protective
machine parts: due to potential risks, we recommend the constant use
headphones.
10
8
230 V - 50 Hz
of P .S.D. (personal safety devices such as gloves, headphones, goggles,
face masks, etc.) according to laws in force to prevent or reduce accident
probability.
• Extended machine use may cause hearing damage: wear protective he-
adphones.
Warning: the appliance continues to work for a few seconds after it has
been switched off. The cutters can reach high temperatures: pay attention-
to injury hazards to persons or things or fire hazards.
• Routers and other accessories must be able to fit exactly in the tool
Warning: the appliance continues to work for a few seconds after it has
holder of your power tool. Accessories that do not fit exactly in the tool
been switched off. The cutters can reach high temperatures: pay attention
holder of the power tool will turn unevenly, vibrate heavily and may cause
to injury hazards to persons or things or fire hazards.
a loss of control.
• Do not use blunt or damaged routers. Blunt or damaged routers cause SPECIFIC USE
increased friction, create imbalances and may become jammed.
Before use make sure that the cutters operating characteristics are com-
patible with those of the machine and that they are not broken or worn.
• Use clamps to secure the work piece. Under no circumstances should
Make sure that the cutters are assembled, handled and stored with care
you hold the work piece with one hand and the electrical tool with the other
according to the manufacturer's indications.
hand, while it is being used. By securing the work piece with clamps, you
Do not use and adapter system for cutters with tangs other than those
can have both hands free to better operate the electrical tool
specified.
• Only bring the power tool into contact with the workpiece when
The machine must not be operated in humid environments or in the pre-
switched on. Otherwise, there is danger of kickback if the cutting tool
sence of flammable gas or liquids.
jams in the workpiece.
Make sure the work piece is sufficiently fastened.
In the event of improper use, the user is fully liable for any damages or ac-
cidents.
RP84
II
1,7 A
350 W
20.000
6
2,0