AUDAC AWP06 Bedienungsanleitung & Installationsleitfaden Seite 5

Warning
 Use only the correct amplifier output voltage and impedance, exceeding these limits
could cause fire or other failures.
 Avoid explosions: do not use the speaker around gasoline, thinner or other
combustibles.
 Only install the speaker in locations that can structurally support the weight of the
speaker. Not doing this may result in the speaker falling down.
 Do not use any other method than specified to mount the speaker. If extreme force is
applied to the speaker, it could fall down.
 Attach a safety wire to the speaker when it is mounted high above the ground. Failure
in doing so could cause the speaker to fall down for any reason.
 Avoid mounting the speaker in locations exposed to constant vibrations. The
mounting points can be damaged by excessive vibration, potentially causing the
speaker to fall down.
Caution
 Avoid electric shocks: switch off the amplifier power when connecting the speaker.
 Avoid installing the speaker in locations exposed to solvents, acids, smoke and
heaters, as excessive exposure to these factors could result in speaker failure, fire or
electric shock.
 Do not operate the speaker for an extended period of time at distorted sound. This
could cause (irreparable) damage to the speaker.
 Do not stand or sit on, nor hang down from the speaker, as this may cause failure of
the speaker.
3