Zero Adjustment; Reference Measuring; Backlight; Automatic Off - Exotek Instruments Mc-550N Bedienungsanleitung

Moisture indicator, pinless
User guide

ZERO ADJUSTMENT

The scanner is always automatic zeroed.
• Keep hands away from the bottom sensor.
• Pay attention to dry hands when using the
scanner.
• Inverted numbers indicate the measuring scan.
• The measuring value is valid if the numbers are
not inverted.

REFERENCE MEASURING

First find a dry area on a material and use it as a refe-
rence value, moisture rating - dry.
Now you can quickly detect higher humidity or leaks
as the measured value increases, either by moving
the device over this surface, or making point to point
measurements.

BACKLIGHT

The backlight will turn off slowly after 5 seconds while
stable measuring and turn on immediately when the
measuring value changes.

AUTOMATIC OFF

The instrument will turn off automatically after 30 seconds
if the measuring value does not change.

TEMPERATURE

The indicated temperature on the lower left side repre-
sent the inner instrument temperature.
7
ENG