Evaluation - Exotek Instruments Mc-550N Bedienungsanleitung

Moisture indicator, pinless
User guide

EVALUATION

Wood / fiberglass
Indication
0 - 3
3 - 6
6 - 11
> 11
NOTE! The density may be different for the materials.
The limits should be viewed as an indication.
4. The moisture scanner MC-550N is not a high-pre-
cision measuring device. We shall not assume any
liability for potential damage resulting from incorrect
use of the device or from the fact, that the scanner
has been used as a measuring instrument. For more
accurate measurements of wood and building ma-
terial it is recommended to use Exotek Instruments
MC-160SA or MC-380XCA.
5. Handle the device carefully and use in accordance
with mentioned specifications only.
ENG
Moisture Moisture rating
content
0-12% Dry: a varnish coating can be applied.
12-20% Air dry: if a varnish coating is to be
applied, ensure use varnish allowed for
moisture in the ground material.
20-30% Wind dry: finishing treatment only pos-
sible using agents with a high moisture
permeability. Whenever several layers
have to be applied, we recommend to
consider drying intervals.
> 30% Wet: finishing is only possible with a
paint system especially suitable for
wet wood.
6