Herunterladen Diese Seite drucken

Noch 66201 Bedienungsanleitung Seite 14

Kleiner lokschuppen mit micro-motion torantrieb h0

Werbung

35.
37.
K4
a
40.
Dann von aussen eine Klebfuge
c
anbringen.
--------------------------------------------
Then fix them with a glue joint
from outside.
NOCH GmbH & Co. KG - Lindauer Straße 49 - D-88239 Wangen im Allgäu - info@noch.de - www.noch.de - Stand 05/2016
64
36.
71
Klebefläche beachten!
-------------------------------
Pay attention to surface for adhesive.
38.
Balken von oben durch leichtes Drehen nur trocken einlegen!
--------------------------------------------------------------------------------------
Set the scantling from the top only in position. Without glue!
Turn the scantling a little for this.
Balken wird nur eingesteckt!
---------------------------------
Plug the scantling without glue!
76
Runde Kanten nach unten!
-------------------------------------
Round edges at the bottom!
Mutter nur trocken einlegen!
----------------------------------------
Set nut only in position.
K3
39.
Nun die Teile gemeinsam,
b
ohne Kleber in Teil 25
einstecken!
-------------------------------------
Now set both parts in position
into part 25 without glue!
!
Without glue
64
25

Werbung

loading