Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATING MANUAL
AmbienArt LED End section
Safety instructions:
1. General
Please read, observe and adhere to the following safety instructions. Please keep the operating manual. Observe all the
warning notices on the device and in the operating manual.
2. Installation
The installation may only be performed by trained, qualified personnel!
3. Designated use
Connect the product as specified in the operating manual. Only use accessories which have been recommended by the
manufacturer.
4. Moisture
Select an installation location for the product which does not have a high level of relative humidity and is free of
moisture. Never use this device near water. Moisture can bypass the electrical insulation and pose a fatal danger, as it
can for all devices not especially designed to be water-resistant. The device may not be exposed to dripping or sprayed
water. No objects may be placed on the devices, especially objects which are filled with water or other liquids (e.g.
vases, etc.).
08
5. Protecting the product
Do not, under any circumstances, expose the device to high levels of humidity. Extreme temperature fluctuations,
humidity and extended exposure to light can damage the device and alter the appearance. Make sure that no foreign
objects or liquids enter the device.
6. Positioning
Do not position the device near sources of heat, heaters, heating valves, ovens or other heat-producing devices. The
device may only be stored and operated in a temperature range from 0 to +30 ℃. The device heats up during operation.
Ensure that air can circulate around the device.
Werbung
