Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connection:
Always observe the correct polarity when connecting.
The LED end section may only be operated with a suitable 350 mA converter, such as the accessory recommended.
Depending on the converter, several LED end sections can be connected in series. The converter's power rating is the
same as the number of LED end sections which can be connected in series. For instance, a maximum of 6 LED end
sections can be operated using a 6 watt converter.
The LED end section has two connections: IN and OUT.
Connect the converter to the IN connection. The OUT connection is bypassed using a wire jumper.
If you wish to switch several LED end sections in series, connect the OUT connection on the first LED end section with
the IN connection on the second one, and so on. The OUT connection on the last end section is bypassed using a wire
jumper.
Note: If an LED does not light up, check the polarity.
AC adapter
230 V AC
-
230 V AC
+
350mA
1 . . . ?
IN
OUT
LED end section #1
OPERATING MANUAL
OUT
IN
LED end section #?
Wire
jumper
11
Werbung
