Abus Eyseo TV7170 Installationsanleitung Seite 35

(Power LED) Status display LED
Shows whether the camera is correctly supplied with power.
(RS485) RS485 control port
Camera control using an RS485 interface. Connect (D+) and (D-) correctly to the control
device (e.g. TV7091 control unit).
(VIDEO OUT)
BNC output. This connector is for connecting the camera video signal to the VIDEO IN
connector of, for example, the monitor (composite signal: 1Vp-p).
DC Drive / Video Drive
Electrically-driven lens "DC DRIVE"
Video-driven lens "VIDEO DRIVE"
35