Brinno TLC200 Pro Bedienungsanleitung Seite 7

Setting
1. PressTIME button to enter capture interval set up. 2. Press MENU
( + ) and TIME(
it by yourself. When complete, press the 0K Button to confirm and
return to the Set up screen.
Capture interval range: from below 1 second to 24 hours.
To Begin
1. After selecting the capture interval, press 0K to proceed to the
Preview Screen. 2. On the Preview screen, press the 0K button to
start recording. During the recording period, the LCDpanel will turn
off to save power.
To Stop
1. While recording, hold the 0K button until the LCD turns on and
shows the text "Processing', it means the camera is processing
file closing. When completed
"Ready' This indicates the recording session is complete. 2. Remove
the SD card from the camera, and insert it into your computer or
laptop to enjoy your amazing Time LapseVideos!
Storage
In this mode, the LCD will display the SD card capacity, so you will
know how much free space remains on the SD card.
Focus
In this mode, the camera will enlarge the preview image, so you can
adjust the lens focus easily.
1. Select and enter "Focus" mode. 2. View the enlarged preview
image. 3. Use the screwdriver
the lens focus. 4. When finished adjusting,
tighten the screw. 5. Press"0K" to exit focus mode.
Setting-Time
1. Press MENU button to enter "Setting" mode. 2. Select and enter
"Time Lapse Frame Rate".
What frame
Generally, 10 FPS is suitable for Time Lapse video, but we suggested
30 FPS. 1 FPS: The video plays 1 frame per second, so the video wil
not look smooth, and the video length will be longer. 30 FPS: T he
video plays 30 frames per second,so the video will look smooth, and
the video length will be shorter.
06 ENGLISH
the Capture
to select a pre-set capture interval or customize
Recording
Recording
status
Mode
Settings
Lapse
rate should I use?
interval
the processing it will display the text
to loosen the screw and adjust
use the screwdriver
Frame Rate
to