Resetting To The Factory Settings; Maintenance And Cleaning; Disposal - Renkforce renkCast Musik Bedienungsanleitung

11. Resetting to the Factory Settings

To reset the product to factory settings, proceed as follows.
• Connect the renkCast Music Box to the voltage supply and wait until it has started up
completely.
• Use a pointed object (such as a paper clip) to push the recessed reset button in the
rear for approx. 10 seconds until the white LED on the front goes out briefly. Release
the button.
• The system restarts and is then reset to factory settings.

12. Maintenance and Cleaning

Servicing or repair must only be carried out by a specialist or specialist workshop.
There are no components in the product that need to be serviced by you. Therefore,
never open it!
A dry, soft and clean cloth is sufficient for cleaning the outside.
Never use any aggressive cleaning agents, alcohol or other chemical solu-
tions that would damage the casing (discolouration).

13. Disposal

The product does not belong in the household waste!
Dispose of the product according to the applicable statutory provisions at the
end of its service life.
30