Herunterladen Diese Seite drucken

SmartGyro SPEEDWAY Bedienungsanleitung Seite 14

Vorschau ausblenden Andere Handbücher für SPEEDWAY:

Werbung

Start working:
1 Display and accelerator
With the skate off, press the on / off button for 3 seconds and it
will be on, the device will turn off automatically after more than 90
seconds of inactivity.
2. Operating modes
With the skate on, press the "+ y -" button to switch between the 4
operating levels (P, 1, 2, 3).
3. Brake Control
The brake cuts the motor power. When you need to brake or stop
the device, you can do so by using the brake levers that actuate
the brake discs. Try not to brake sharply to avoid falls.
Battery and Charger:
Each smartGyro is equipped with a lithium battery and charger
and has its own serial number. Do not replace the battery or its
charger, it could be dangerous.
Lithium Battery
Please fully charge the battery before using your smartGyro
Speedway
Charge the battery when its level is at half of the power bar to
avoid influencing your driving.
Charger
The charger's overcharge protection function will automatically
stop the charging process when the battery is 100% full.
Charging instructions:
1. The vehicle must be turned off during charging
2. Connect the charger plug to the mains.
3. Important: plug the charger into a 100V-240V outlet.
4. Red light: charging in progress. Green light: charging process
completed. Please always store the charger in a dry and ventila-
ted environment.
EN
13

Werbung

loading