Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.Connect the mouse to the USB port of the NVR.
4.Connect the NVR to the monitor with a VGA or HDMI cable.
5.Follow the steps on the monitor to complete the initial setup.
NOTE: There is no VGA cable and monitor included in the package.
NVR
6.Power on your WiFi cameras and connect them to the LAN ports
(for IPC) on the NVR via Ethernet cable.
Sync Wi-Fi info
7.Click Sync Wi-Fi Info to connect the cameras to the NVR's Wi-Fi.
8.After the synchronization succeeded, remove the Ethernet cables
and wait for a few seconds for them to be reconnected wirelessly.
9.Once the Wi-Fi configuration succeeds, the cameras can be
installed at the desired location.
9
English
Access the NVR via Smartphone or PC
1. UID is disabled by default. To enable remote access via your
smartphone or computer, navigate to Settings > System > Info on the
monitor.
2. Connect the NVR to a router using the included Ethernet cable.
3.Download and launch the Reolink App or Client and follow the
instructions to access the NVR.
• On Smartphone
Scan to download the Reolink App.
• On PC
Download path: Go to https://reolink.com > Support > App & Client.
English
10
Werbung
