MALTEC MasterMeter Bedienungsanleitung Seite 24

Auto Height Measurement
Refer to figure 4. Press
the flashing line, press
nd
2 line, then you can get vertical height displayed in summary line.
Add/Subtract
Add: short press
Subtract: short press
st
Measure the 1 distance, then press
display, then press
automatically added to/subtracted to the 1t value.
Note: This process can be repeated as required.
to select Auto Height mode
to get the distance for 1
Angle
1st distance
2nd distance
Result
nd
to measure the 2
24/ 38
. According to reminding of
st line; press
, add/subtract icon wil appear on
nd
distance, the 2 value will be
again for