MALTEC MasterMeter Bedienungsanleitung Seite 18

Auto Height
Add / Subtract
Memory
Measuring Reference
Measuring Units
Auto Power Switch-off
Laser Class
Laser Type
Battery Type
Operating Temperature
Dimension
1. Measuring Range
The Maximum range shall be different according to different models. The actual range
refers to the package.
2. Measuring Accuracy ("D" stands for measured distance)
If measuring under favorable conditions, such as smooth surface, proper temperature and
indoor lighting, the device is able to work within certain range as declared.
Maximum deviation occurs under unfavorable conditions such as bright sunlight or when
measuring to poorly reflecting or very rough surfaces.
Tips: In case of bright sunlight and bad reflection of the object, please use the target plate
or reflector.
Operation Instruction
The Single distance measurement prompt when it is switched ON, press
measuring mode, and the flashing line reminds user to get the newest result.
The measuring data should be different due to different Reference settings.
Single Distance Measurement
The device will come to Single distance measurement
Press after aiming at target to get result in summary line.
✓
✓
20 values
Front / Rear
m/ft/in/ft+in
After 180s
Class 2
630-670nm, <1mW
AAA 2 x 1.5 V
0°C~+40°C(32°F~+104°F)
115*50*29,5mm
18/ 38
to select
when it is switched ON.