Red Bull Racing RB-RTENTURBO10-12-ES Bedienungsanleitung Seite 10

Direction lights (7) (8)
The left arrow will blink if the left direction has been selected. The right arrow will blink if the right direction light has been
selected.
Speed unit (12)
Quickly press the power button 5 times to change from Km to miles.
Error status
When one of these error codes appear on the display, kindly contact your retailer or after-sale-service for immediate assistance.
Remarks: When the above error occurs, the rear tail lamp will flash at 10Hz high frequency. The motor will not operate; therefore,
the motor cannot be seen as damage when it does not operate when error occurs.
Code
Battery temperature is high. Battery is
P0
nearly out of power.
P1 Controller temperature is high.
Communication failure between display
E0
and controller.
E1 Throttle failure.
E2 Brake failure.
Meaning
It usually appears during use, meaning the battery is low.
Turn off the e-scooter for 10 minutes waiting for normal
temperature. Charge the battery.
Turn off the e-scooter for 5 minutes waiting for normal
temperature.
Check display, controller, and their connection cables. After-
sales service is required.
The throttle signal does not enter the speedometer. After-
sales service is required.
It is because the throttle signal does not enter the
speedometer. After-sales service is required
Description
10