Factory Reset - Falcon 4G 150 Router Benutzerhandbuch

ROUTER FACTORY RESET
A factory reset should only be used as a last resort if all other resolution
attempts have failed.
PLEASE NOTE: All configurations, SSID's and Wi-Fi Passwords will be lots and
will return to the factory default settings.
THE FACTORY DEFAULT SETTINGS CAN BE FOUND ON A STICKER ON THE
REVERSE OF THIS USER MANUAL
To perform a Factory Reset of the router you will need to open the SIM / Reset
flap on the bottom of the router.
Locate the reset button marked above and with a pen / paperclip or other
small appliance, Press and hold the Reset button for about 15 to 20 seconds.
Whilst the Reset button is depressed, all of the LED Icons will light up.
When the reset button is released, the LEDs will flash and the will cycle
through the LEDs whilst a normal boot up process resumes.
THE ROUTER WILL NO LONGER SHOW UP AS FALCON 4G 150. INSTEAD THE
WIFI SSID WILL SHOW AS PER LABEL ON THE BACK OF THIS USER MANUAL.
TO RECONFIGURE THE ROUTER YOU WILL NEED TO LOG IN TO THE WEB
INTERFACE AND CHANGE THE SSID AND WIFI PASSWORD BACK TO THE DETAILS
THAT ARE ON THE FRONT OF THE ROUTER OR A CHOSEN ALTERNATIVE.
16