Reolink Go PT Bedienungsanleitung Seite 3

Camera Introduction
Speaker
Status LED
IR LED
Lens
Daylight Sensor
Built-in PIR Sensor
Built-in Mic
Nano SIM Card Slot
*Rotate the camera's lens to find the reset hole,
SIM card slot and SD card slot.
Reset Hole
*Press and hold the reset button with a pin for 10
seconds to restore the device to factory
Micro SD Card Slot
Antenna
Micro USB Port
Battery Status LED
Power Switch
*Please always cover the USB charging
rubber plug after charging the battery.
3 English
. tedink
settings.
port with
Set up the Camera
Activate SIM Card for the Camera
• The SIM card shall support WCDMA and FDD LTE.
• Some SIM cards have a PIN code. You may use gour smartphone
NOTE' Do not insert the IoT or M2M SIMinto gour smartphone.
Insert the SIM Card
O
Rotate the camera lens, and
remove the rubber cover.
to disable the PIN first.
English
4