Starkey mRIC R Gebrauchsanweisung Seite 16

30 | Troubleshooting guide
Compatible Chargers
Symptom
*Premium chargers include an
on-board lithium-ion battery
Hearing Aids
Whistle in
Charger
No LED indicator
Starlink Charger 2.0
when hearing
(Custom)
aids are charging
or just inserted
into the charging
contact
Solutions
1. Remove your hearing aids
from the charging contacts.
2. Confirm your charger is
plugged into a working
external power source
(i.e. wall outlet). The hearing
aid charging LEDs on the
front of the charger will
turn on for a few seconds
to indicate the connection
to the power source.
3. Place your hearing aids back
into the charging contacts.
4. Ensure correct charging
orientation with the
faceplate facing down
on charging contacts.
CAUTION:
If set to the maximum output level and worn for periods of time exceeding
the recommendations below, the patient's exposure to sound energy has the potential to
exceed noise exposure limits. This instrument is intended for use for a maximum of sixteen (16)
hours a day when set at the maximum output level.
TINNITUS THERAPY CONCEPTS AND BENEFITS
Multiflex Tinnitus Technology can be used as a part of a tinnitus treatment program.
Multiflex Tinnitus Technology plays a white noise through the hearing aid.
Multiflex Tinnitus Technology is programmed according to your hearing loss and preference,
and your hearing professional can adjust the settings of Multiflex Tinnitus Technology to meet
your needs.
Multiflex Tinnitus Technology may provide temporary relief of your tinnitus.
PRESCRIPTION USE ONLY (USA)
CAUTION:
USA Federal law restricts this instrument to sale by or on the order of a
doctor, audiologist or other hearing care practitioner licensed to dispense hearing aids in
your state. The use of any sound generating tinnitus therapy instrument should be only on the
advice and in consultation with your audiologist or hearing care practitioner.
Your hearing professional will properly diagnose and fit the instrument to your personal needs
and requirements. This should include its use in a prescribed tinnitus treatment program. Your
hearing professional will also be able to offer the appropriate follow-up care. It is important
that you follow your hearing professional's advice and direction regarding such care.
Important Notice for Prospective Sound Generator Users
Good health practice requires that a person with tinnitus have a medical evaluation by a
licensed physician (preferably a physician who specializes in diseases of the ear) before using
a sound generator. Licensed physicians who specialize in diseases of the ear are often referred
to as otolaryngologists, otologists or otorhinolaryngologists.
The purpose of a medical evaluation is to assure that all medically treatable conditions that
may affect tinnitus are identified and treated before the sound generator instrument is used.
Tinnitus Technical Data: Multiflex Tinnitus Technology Maximum Output = 92 dB SPL (typical)
when measured in a 2cc coupler per ANSI S3.22 or IEC 60118-7.
Intended Purpose
Hearing Aids: Air conduction hearing aids are wearable sound-amplifying devices that are
intended to compensate for impaired hearing. The Multiflex Tinnitus Technology is a tool to
generate sounds to be used in a Tinnitus Management Program to relieve patients' suffering
from tinnitus.
Charger: The device is intended to charge lithium-ion standard or custom rechargeable
hearing aids and is to be used with the patient's selected hearing aid standard solution.
Indications for Use: Air conduction hearing aids are available in multiple gain/output levels
appropriate to treat patients with hearing losses ranging from mild to profound. The Multiflex
Tinnitus Technology is indicated for patients suffering from tinnitus.
Additional guidance | 31