Ruijie Reyee RG-EW1200 Installationsanleitung Seite 8

Indicator Instruction
Indicator
System Status Indicator
WiFi Indicator
Port Indicator
FAQ
Why cant I visit 192.168.110.1?
1) Check whether NIC is configured as DHCP.
2) Ensure the computer is connected to any of the LAN ports and the
indicator is on; otherwise you may change the cable and have a try
again.
3) Re-open the browser (recommend to use Google Chrome) and
visit 192.168.110.1 again.
4) Change the browser.
5) Change the cable or computer.
If all these methods fail, please restore the factory settings (hold the
Reset Button for IOS).
Why can't I access the Internet after configuration?
1) Check whether the cable is connected as the instruction, and the
indicator is on.
2) Check the Internet connection type.
a. If your ISP offers an account/password,
enter your account/password.
b. If your ISP offers the static IP address, subnet mask, gateway and
DNS, please select Static IP and enter the information.
3) If you still can not access the Internet, please contact your ISP.
Note:
This equipment is restricted to indoor operation in 5.15-5.35GHz for
Hong Kong.
Status
Off The
Stead On The
Restorin
Fast Blinkin
stead On Re
Reyee Mesh is being paired or
Slow
Blinkin re eater
The port is not connected or the
Off
cable
Stead On The
4
Descri •on
router is owered
router is runnin normal
facto settin
ee Mesh is runnin
sto s
disconnects
ort is connected normall
please select PPPoE and
off
s/Rebootin
normall
.1