Ruijie Reyee RG-EW1200 Installationsanleitung Seite 7

Reyee Mesh router can connect
distributed network.
1. Connect the main
Please refer to the Quick Installation for configuration.
This router is used as the main router
Reyee Mesh routers are secondary routers.
2. One-click connection
Please make sure that the routers to be paired are in the factory settings. If
they are configured before, restore the factory settings first (see the FAQ for
how to restore the factory settings). Do not connect the network cable to the
routers.
Power on the routers
will start to blink quickly. Wait for a period of time, the system indicators will
turn to steady on, which means the routers are on. Press the Pairing button
on the main router,
will search for neighboring secondary routers for 2 minutes.
After the search is over, the WiFi indicator changes to steady on. When the
WiFi indicators on the secondary routers blink, it means that two routers are
being paired; when the WiFi indicator changes to steady on, the pairing
completes.
3. Move the paired Reyee Mesh routers
signal needs to be expanded,
configuration is required.
After the router is powered on, the WiFi indicator blinks, which means it is
connecting to the main router. When the WiFi indicator turns to steady on,
the connection is successful, and a distributed WiFi network can be
constructed.
Broadband
Ensure the router
After pressing the button, the WiFi indicator starts blinking.
As the detection ends after 2 minutes, it will stop blinking.
router to the Internet
within 2 meters
and its WiFi indicator
and power them on. No more
pairing
o coco
MAIN ROUTER
MAIN ROUTER
can access the Internet
with each other to form a
of the distributed
of the main router,
will start to blink. The main router
to the positions
O OOQQ
Secondary
Secondary Router
DO not connect
During pairing, the WiFi indicator blinks.
If pairing succeeds,
3
network, and other
and their indicators
where the
Router
with network cable
it will stop blinking.