NEFF E1ECC0AN0 Gebrauchsanleitung Seite 47

Use the residual heat of the hob. For longer cooking times,
■
you can switch the hotplate off 5-10 minutes before the end
of the cooking time.
Getting to know your appliance
The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2.
The hotplates
Hotplate Activating and deactivating
Single-circuit
$
hotplate
Dual-circuit To activate: turn the hotplate control clock-
ð
hotplate
wise to
vate: turn the hotplate control to 0 and
reset. Never turn the hotplate control
beyond the
Extended To activate: turn the hotplate control clock-
î
cooking zone
wise to
vate: turn the hotplate control to 0 and
reset. Never turn the hotplate control
beyond the
Setting the hob
This section informs you how to set the hotplates. The table
shows heat settings and cooking times for various meals.
Switching the hob on and off
You can switch the hob on and off with the hotplate controls.
Setting a hotplate
Adjust the heat setting of the hotplates using the hotplate
controls.
Heat setting 1 = lowest setting
Heat setting 9 = highest setting
Note: Hotplate temperature is regulated by the heat switching
on and off.The heat may also switch on and off at the highest
setting.
This ensures e.g.:
sensitive components are protected from overheating
■
the appliance is protected from electrical overload
■
better cooking results are achieved
■
. Set the heat setting. To deacti-
ó
ó symbol to 0.
. Set the heat setting. To deacti-
ó
ó symbol to 0.
Hotplate and residual heat indicators
The hotplate and residual heat indicators
hotplate is warm:
Hotplate indicator - during operation, shortly after you have
■
switched on a hotplate.
Residual heat indicator - after cooking, when the hotplate is
■
still warm.
You can use the residual heat to save energy, e.g. to keep a
small dish warm or to melt chocolate.
light up when a
"
15