VEVOR CF123 Bedienungsanleitung Seite 4

Once you have enough water, put the cap back on and tighten it with the wrench
tool.
That's All! Now you're ready to relax. You deserve it!
WHAT ARE RECOMMENDED CLEANING TECHNIQUES FOR IN-POOL
PRODUCTS?
Occasionally, a deep cleaning of your in-pool Lounger product is necessary.
Frequent usage and even incorrect balances of pH and alkalinity can cause scale
and other residues (sunscreen, lotion, etc.) to adhere to the Lounger resin material.
But don't worry. Cleaning is easy!
We first recommend cleaning with water, then try a mild household cleaner, Magic
Eraser, or a Calcium, Line, and Rust cleaner. If an even deeper cleaning is needed,
we recommend Bio-Dex 300 Swimming Pool Tile Cleaner. It can be purchased at
most pool supply stores as well as Amazon.
In the event Bio-Dex 300 is required, perform the following steps:
Remove your Lounger product(s) from the pool and drain appropriately.
In a ventilated area, and utilizing proper PPE, apply Bio-Dex 300 to a soft
scrubbing pad and scrub affected areas in a circular motion. Apply pressure and
continue application of cleaner until desired results are achieved.
Once cleaned, rinse your Lounger product with clean water and dry appropriately.
WARNING: Please follow all precautionary chemical labels. Bio-Dex is a harsh
chemical, and the utmost care and protection are advised. Proper personal
protective equipment (PPE) is required. PPE can include, but is not limited to,
heavy-duty rubber gloves and safety glasses.
DO O I NEED TO REMOVE MY IN-POOL LOUNGER FURNITURE FROM THE
POOL AFTER USE?
- 3 -