Xblitz RF300 Bedienungsanleitung Seite 13

05. FAQ
1. No power
- the car's engine is turned off,
- if the power supply for accessories is installed in the car, you can turn the
car key to ACC to provide power to the accessories,
- if the power circuit is burnt, change it,
- if the temperature in the car is too high, lower it and try again.
2. No sound
- if the sound it set to minimum, set it to a proper value,
- improper wiring, improper file format or damaged files on the drive can cause
the lack of sound.
3. No radio reception
- if the antenna ISnot connected properly or the reception is weak, make sure that
the antenna is properly mounted in place,
- if you cannot find any radio stations during an automatic scan, the broadcasting
signal can be too weak for the device to pick it up. Try tuning it manually.
4. Wiring diagram
- make sure that the casing is properly grounded. Proper grounding eliminates
most issues with electronic noise. Good grounding of the casing require
connecting it to the car's chassis. The area around the connection should be
thoroughly cleaned - with no rust, paint, plastic or dust - for best grounding
quality
06.TECHNlCAL
MP3 crosstalk:
QC2.Oquick charging:
blitz
SPECIFICATION
Power . RMS 4x25W,
-80 Db
MP3 SNR 93 Db
FM SNR: -92 Db
12V car battery (grounded cathode)
Voltage
Ves
: USBI (OTG) 5V/50mA-120mA,
Two ports
USB2 (charging)
RCA: 4
BT version• . 5.0
RGB: 7 colours
Supports
AUXI USB drive/ microSD card
Weight:
472g
Dimensions: 187x120x55mm
13
Max4x50W, 12W
EN